数显500KN锚杆拉拔仪规格齐全

锚杆拉拔仪适用于检测各种锚杆、钢筋（植筋）、膨胀螺栓、化学锚栓等锚固件的抗拔力，也可做玻璃幕墙的现场抗拔力检测（试验），是各质检、施工单位必备的检测仪器。本产品保修一年，本公司对所售出的产品实行终身维护负责制。

符合标准

GB 50367-2013《混凝土结构加固设计规范》；GB 50330-2013《建筑边坡工程技术规范》；JGJ 120-2012《建筑基坑支护技术规程》；CECS 22：2005《岩土锚杆（索）技术规程》；GB 50007-2011《建筑地基基础设计规范》；JGJ 145-2013《混凝土结构后锚固技术规程》；GB 50550-2010《建筑结构加固工程施工质量验收规范》；GB 50203-2011《砌体结构工程施工质量验收规范》

仪器简介

锚杆拉拔仪是由手动泵、中空液压缸、数显压力表、带快速接头的高压油管、配选件（锚具、转换接头、拉杆）和手提便携箱组成，50T液压缸为手动复位式（可配电动泵），本仪器中的数值显示部分为一体式多功能显示仪表采用进口传感器灵敏度高、数值准确可直接读取拉力值（KN）并有自动计算、峰值保持、存储和查询功能，带有背光显示、中空液压缸加有防尘系统和进口密封圈，使用寿命长，特别适合试验室和现场使用，操作简单，易学易用。
技术参数

数显500KN锚杆拉拔仪规格齐全

Instrument Introduction

The Anchor Bolt Pull-Out Tester consists of a manual pump, a hollow hydraulic cylinder, a digital pressure gauge, a high-pressure oil pipe with quick connectors, optional accessories (anchorage, adapter, tie rod), and a portable carrying case. The 50T hydraulic cylinder is manually resettable (electric pump optional). The numerical display part is an integrated multi-function display instrument with an imported sensor, featuring high sensitivity and accurate readings. It can directly display the pulling force value (kN) and includes functions such as automatic calculation, peak hold, storage, and query. It has a backlight display. The hollow hydraulic cylinder is equipped with a dust-proof system and imported seals, ensuring a long service life. It is particularly suitable for laboratory and on-site use, with simple operation that is easy to learn and use.

Technical Parameters

• Maximum Pressure: 0–500 kN

• Indication Error: ≤±1% F.S.

• Language: Chinese

• Storage: 50 entries

• Resolution: 0.01 kN

• Printing: None

• Pressure Curve: None

• Force Unit: kN

• Screen: LED

• Peak Value: Yes

• Charging Method: 9V battery

• Pressurization Method: Manual

• Auto Power Off: Yes

• Center Hole: 60 mm

• Stroke: 120 mm

• Cylinder Reset: Manual